1. User Control Panel
2. Carrying Handle
3. No-Draft Diffuser
4. Particle Post-Filter Sleeves
5. Gas and Odor Filter Cartridges
6. Snap-Open Locking Arms
7. High-Performance Centrifugal Fan
8. Advanced Fan Control
9. Pre-Max Pre-Filter (Class H11)
10. Dual Floor Air Intake
| General |
| Number of Selectable Fan Speeds |
6 |
| Air Delivery (with new filters installed) per Speed |
1 - 35 cfm
2 - 60 cfm
3 - 95 cfm
4 - 125 cfm
5 - 150 cfm
6 - 250 cfm |
| Maximum Coverage Area |
900 sq ft |
| System Efficiency for Particles |
99% or more for .3 microns
95% for smaller particles |
| Power Requirements |
115 VAC 50-60 Hz. The entire electrical system is UL
certified. |
| Energy Consumption (Max) |
215 W |
| Dimensions |
H 28" W 15" D 16" |
| Net Weight (including filters) |
51 lbs |
| Warranty Period |
1 yr on unit including fan motor, excluding filters |
| Filters |
| Filter Configuration |
1 Pre-Filter 2 Hg Cartridges 2 MultiGas
Cartridges 4 Post Filter Sleeves |
| Pre-Filter |
DOP 97% high accumulation media 25 sq ft area |
| Gas Phase Filter |
Approx. 5.5 lbs of impregnated activated carbon. 2.25
lbs each of activated carbon chemis. |
| Post Filter Sleeves |
98% DOP (.3 microns) electrostatic media |
| Average Filter Life |
Pre-Filter 6-18 months, Gas phase filter: 1-3 yrs,
Post filter 1-3 yrs |
| Housing |
| Number of Housing Modules |
6 |
| Housing Material |
PC-ABS (fire resistant) and ABS(UV-stabilized)
non-offgasing, high impact resistant |
| Color of Main Housing/Arms |
Light Gray/White |
| Air Intake |
Two side openings at base of unit |
| Air Outlet |
Via diffuser with horizontal 320 degree opening on
top of unit |
| Fan |
| Fan Type |
Centrifugal fan, backward curved, single inlet,
UL/CSA registered |
| Bearings |
Maintenance-free steal ball bearings |
| Speed Regulation |
Voltage reductions via capacitor switching |
| Electronic Control Panel |
| Control Panel Finish |
Polyester overlay panel |
| Main Display |
Liquid crystal display, 16 character x 2 line |
| Status and Indicator LEDs |
Timer Status LED, Filter Life Status LEDs, Fan Speed
Indicator LEDs |
| Display Languages |
English, French, German, Italian, Spanish |
|
Customized
Pollution Control for Dental Offices
The IQAir® Dental Pro is a dental room air cleaning system. It is
designed to be placed anywhere in a dental office and clean the air by
constant recirculation within the room.
The IQAir Dental Series units are based on the IQAir GC design and
contain filter cartridges, which optimize them for the pollutants found in
dental offices. The post filter is electrostatically charged to trap
particulate pollutants and microorganisms (bacteria and viruses). The
neutral white and light grey design integrate perfectly in all dental
offices.
For more critical control of gaseous compounds see our
GC Series models.
Check out the IQAir
List of Clients
IQAir®
offers products designed for removing all of the following chemicals, gases, and
pathogens, and for the treatment of several conditions
See IQAir's
List of expanded and detailed list of pathogens. |
