Shock treatments

Complete with (1) 30 gallon Oxygen Receiver Tank, one Compressor per oxygen generator (2 total), one Enclosure per oxygen generator(2 total), Instruction Manual, and (1) 4 lb spring Pressure Regulator.
120 VAC 60 Hz

Specifications:

Product Characteristics:

• Standard Product Flow: 24 SCF/hr1 (0.63 Nm3/hr2)
• Standard Product Pressure: 0–18 psig (0–124 kPa)
• Minimum Product Purity: 90% Product Dew Point: -100°F (-73°C)
• Ambient Operating Conditions
• Locate the oxygen generator in a well-ventilated area that is protected from weather elements and remains between 40°F (4°C) and 112°F (44°C)
• Control Power Requirements 120 V ~ ±10%, 50/60 Hz, Single Phase, 8 A 220 V ~ ±10%, 50/60 Hz, Single Phase, 4 A
• Typical Power Consumption (at 90% purity): 700 W
• Physical Characteristics Dimensions (W x D x H): 45 x 20 x 48 in. (114 x 51 x 122 cm)
• Weight: 290 lb. (132 kg)
• Physical Connections Product Gas Outlet: 1/8” FPT off pressure regulator
• Warranty: 1 Year Parts and Factory Labor*

*An unprotected or inadequately ventilated environment or improper control power may cause damage to the oxygen generator not covered under warranty. AirSep Corporation continually improves its products and reserves the right to change specifications or design without notice. Oxygen Generators manufactured by the Commercial Products Division of AirSep Corporation are sold for use in industrial applications only.

Contact AirSep Corporation or an authorized AirSep representative before purchasing a unit for any medical application.
 

info@o3ozone.com

Need help with specifications?  See the Oxygen Unit Conversion Calculator