- D 500 PRODUCT SPECIFICATION
The D 500 ozone generator is designed for use with oxygen or an air drier. It is available with options such as 10 position switch, air pump, and requires no cleaning
Silent pulse injection corona discharge.
Dry air or oxygen, free of dust and oil. Max. pressure ±0.36 bar (±5 psi).
Ozone Production (with supplied AC adaptor)
500 mg/h from oxygen at 3 L/min air flow using 12VDC/800mA supply. 250 mg/h from dry air at 50% R.H. (1 L/min = 2 SCFH)
Self-cooled cabinet. Ambient air ±35°C. Maximum 85% R.H.
12VDC/800mA certified AC adaptor supplied with system.
12VDC/2A or 24VDC/1A for increased ozone production.
254mm high x 152mm wide x 89mm deep (10"x 6"x 3.5") stainless steel cabinet, aluminum base with key holes for wall mounting.
A minimum air flow is not required. The Balance Barometer is required with all water treatment installations.
Refer to installation manual for specific conditions.
In conjunction with air dryers, controllers, mixing systems, and other equipment approved by the Application Engineering Department.
Units are available with outputs of 280mghr, Ductzone 300, 420, 700, 1,000, 1,908, 2,600, 3,600, 5,000, 8,000 and 10,000 mg/hr. Some of these units can be upgraded for higher outputs.
PRO 3400 V3, PRO 3400 V5, PRO 3600 V1, PRO 3600 V5, PRO 5000 V, PRO 10000 V, or 0302-8000
MZ280, PRO 420, PRO 700, PRO 3400 V1, PRO 3400 V3, PRO 3400 V5, CA 45-2, PRO 3600 V1, or PRO 3600 V5
Ultra-Pure Laboratory Equipment, Materials Research or Water / Liquid Disinfection:
V 8000, S 4000, (many more choices available on the Ultra Pure Products page).