Ultraviolet (UV) vs. Corona Discharge ozone generation:o3ozone offers both UV (ultraviolet), and Corona discharge Ozone Generators. This gives us the competitive advantage because of lack of bias between the two types of technology. For Air Treatment uses such as sterilizing an environment, UV ozone generation is superior because of stable high outputs and reduced cleaning/ maintenance. UV Ozone Generators: UV Ozone Generators: UV PRO 550 Ozone Generator UV PRO 1100 Ozone Generator UV PRO 2800 Ozone Generator UV PRO 4000 Ozone Generator UV PRO 6800 Ozone Generator When choosing between these two types of technology, consider trusting a company that sells both types of technology. Which is better; UV (ultraviolet) Ozone Generation or Corona Discharge? See Also: Ambient Air Ozone Generators Compared to Oxygen Fed or UV Ozone GeneratorsNOTE: Some of information on different pages of this website regarding the comparison of UV ozone generators to corona discharge ozone generators is redundant, but depending on what you searched for, you may have landed on different pages. We felt this information was important in decision making between the two types. Regardless of claims, all corona discharge ambient air ozone generators will produce their maximum ozone in a dry environment, such as below 10% humidity. Some users, such as those in Arizona and other dry or desert areas will experience the maximum output from their corona discharge ozone generators in these areas because of the ultra-low humidity conditions, which is sometimes in the single digits. The reason humidity greatly reduces ozone output of corona discharge ozone generators is because a corona discharge ozone generator is basically millions of static electricity lightning bolts on a thin film, and as you know humidity eliminates static electricity, the corona process is significantly reduced. The reduction is typically linear with the humidity level, so if there is 60% humidity, there is at least 60% less corona activity, or 60% less ozone output. |
When a seller states their Corona Discharge ozone generators are rated for their maximum ozone output in high humidity....well just think about that and you know it does not make sense. Any corona ozone generator will produce its maximum ozone in an environment with ultra low or no humidity. |
Why are UV ozone generators a better choice than corona discharge ozone generators?
(For all air or surface sterilization Shock treatment applications such as MOLD, Smoke, Fire odors, musty smells, flood odor, protein decomposition odor, germ and virus remediation, etc.)
The Biggest difference between corona discharge and UV ozone generation methods is that UV ozone generators have stable ozone output levels throughout humidity ranges, while the output of corona discharge ozone generators is significantly reduced by just moderate humidity levels such as 40–70% (ozone output is reduced by approx. 40-70% with 40-70% humidity). In addition, with UV ozone generators, the cleaning requirement is almost eliminated compared to corona discharge ozone generators. Also, the ozone produced from a UV ozone generator is cleaner (no nitric acids) and smells better than ozone produced from corona discharge machines, and is just as powerful and often more powerful as ozone produced by corona discharge ozone generators. UV ozone generator models include UV PRO 550, UV PRO 550AT, UV PRO 1100AT, UV PRO 2800, UV PRO 4000, and UV PRO 6800 If you need an ozone generator with adjustable ozone output, two new models, the UV PRO 550AT or UV PRO 1100AT are ideal. The "AT" stands for Adjustable with 48 hour Timer. These models produce the cleanest and sweetest ozone ever possible - adjustable down to very low levels or high levels for shock treatments and are much more dependable than corona models on the market! Please call 330-497-6900 for information or to purchase. |
Advantages of Corona Discharge ozone generation: Creates higher quantities of ozone more efficiently (only applies to ozone systems designed to be used with either heated desiccant air driers or oxygen feed gas) Corona cell life exceeds the life expectancy of any UV bulb (only applies to ozone systems designed to be used with either heated desiccant air driers or oxygen feed gas) Small construction allowing generator to be installed in virtually any area Highest ozone concentration possible of any type of ozone generation (only applies to ozone systems designed to be used with either heated desiccant air driers or oxygen feed gas) Industrial Systems can use preparations of oxygen, doubling the output of ozone per volume vs. dry air or ambient air More cost-effective than UV-ozone generation for large scale high concentration installations. (only applies to ozone systems designed to be used with either heated desiccant air driers or oxygen feed gas) less electrical energy is required to produce a the same quantity of ozone Higher gas phase concentrations means the handling of lower gas volumes (again, this applies to ozone systems designed to be used with either heated desiccant air driers or oxygen feed gas)
Advantages of Ultraviolet (UV) ozone generation:- significantly reduced cleaning/ maintenance
and easier to cleanZero Nitrogen Oxides (000.000, while corona discharge ambient air systems are always 0.08%+; this is a lot!)UV (ultraviolet) ozone production is not affected or diminished by humiditystable and consistent ozone output throughout all humidity rangescleaner ozone production with no by products UV ozone Generators are the most reliable commercial ozone generators, even in adverse conditions and temperatures. Our UV ozone machines also produce Hydroxyl Radicals as well as ozone. Hydroxyl Radicals are aggressive at killing germs that go through the machine, though they cannot travel throughout a building as their life expectancy is only a few seconds. It is the Ozone our UV Ozone Generators produce that travels throughout the building killing germs during shock treatments. Disadvantages of UV ozone generation: (disadvantages do not affect the type of systems treating air or mold as the differences in concentration are realized when using oxygen)
Maximum ozone production rate is two grams/hr per UV bulb - depending on size while CD systems can obtain much higher concentrations (only when used with either heated desiccant air driers or oxygen feed gas) Highest ozone concentration that can be produced by 185-nm UV lamp is 0.2 percent by weight, approximately 10% of the average concentration available by corona discharge (only applies to ozone systems designed to be used with either heated desiccant air driers or oxygen feed gas). (higher concentrations are needed for proper ozone water treatment and other industrial applications) Note that 0.2% of ozone is a significant level; this is why ozone concentration is measured in Parts Per Million (PPM). It only takes 3-4 PPM to kill off all germs, including MOLD, Bacteria, and Viruses. |
more electrical energy is required to produce a the same quantity of ozone Lower gas phase concentrations of ozone means the handling of much higher gas volumes UV lamps solarize over time, requiring periodic replacement (after 9-16 months of continuous use)
Disadvantages of Corona Discharge ozone generation: pure oxygen feed gas or an electronic heated desiccant air drier, regardless of claims Humidity affects ALL ambient air fed corona discharge systems - just as static electricity is reduced or eliminated by humidity...Regardless of claims. It is recommended to use UV ozone generators over corona discharge ozone generators for all air applications including MOLD treatment, Fire, Smoke, Flood, Water, ODOR, and Germ, Virus Remediation. UV ozone generators will last longer and require minimal cleaning and maintenance while maintaining consistent ozone output. The ozone output from all ambient air Corona Discharge Ozone Generators is significantly diminished by humidity and deposits (from the corona process).
UV Ozone Bulbs vs. UV Sterilizer BulbsNote that UV ozone generators are not simply UV sterilizers, but high output UV ozone generators.
There is a big difference in the two types of UV bulbs used - often they are confused.
The bulbs included in our UV ozone generators produce high levels of ozone for Shock treatments. With these ozone producing bulbs, ozone air purification of a room can usually be obtained in a just few minutes of use. Longer treatment times will result in high levels of ozone for shock treatment use - these high levels are for germ and mold killing treatments and should be done while no one is in the room.o3ozone will soon be offering UV sterilizer bulbs that are interchangeable with the UV ozone producing bulbs of our UV Ultraviolet Ozone Generators for those wanting small room occupied air purification without high output ozone production. UV ozone generation is superior because of stable high outputs and reduced cleaning/ maintenance. see the UV Ozone Generators: UV PRO 550, UV PRO 2800, and UV PRO 4000. UV PRO 2800T48 *popular, Professional Choice.
This is the new choice for Commercial Ozone Applications / users!
UV PRO 2800
| Popular Ozone GeneratorUsed by leading fire smoke flood mold odor remediation companies: High powered UV PRO 6800, UV PRO 4000, and UV PRO 2800 Ozone Generators. Use for serious restoration work, commercial applications, manufacturing, barns, etc. Read why UV ozone generators outperform units rated higher. The UV PRO 2800 is designed for use as a heavy duty Ozone shock treatment tool. In higher humidity, the UV PRO 2800 exceeds the ozone output of the PRO 5,000. (Read the product description to understand why).
Ideal for use in fire / flood restoration, crime scene cleanup (protein decomposition), garbage compactors, garbage transfer stations, heavy restoration, auto detailing, all heavy odor remediation tasks, food service sterilization packaging / manufacturing, bacteria or mold odors Home/ Commercial decontamination, purifying rooms in hotels and for killing mold, and more. | UV PRO 4000T48 *popular, Professional Choice.
This is the new choice for Commercial Ozone Applications / users!
UV PRO 4000
| Popular Ozone GeneratorUsed by leading fire smoke flood mold odor remediation companies: High powered UV PRO 6800, UV PRO 4000, and UV PRO 2800 Ozone Generators. Use for serious restoration work, commercial applications, manufacturing, barns, etc. Read why UV ozone generators outperform units rated higher. The UV PRO 4000 is designed for use as a heavy duty shock treatment tool. In higher humidity, the UV PRO 4000 exceeds the ozone output of the PRO 10,000. (Read the product description to understand why).
Ideal for use in fire / flood restoration, crime scene cleanup (protein decomposition), garbage compactors, garbage transfer stations, heavy restoration, auto detailing, all heavy odor remediation tasks, food service sterilization packaging / manufacturing, bacteria or mold odors Home/ Commercial decontamination, purifying rooms in hotels and for killing mold, and more. | UV PRO 6800T48 *Ultimate Professional Choice.
This is the new ultimate choice for Commercial Ozone Applications / users!
UV PRO 6800
| Popular Ozone GeneratorUsed by leading fire smoke flood mold odor remediation companies: High powered UV PRO 6800, UV PRO 4000, and UV PRO 2800 Ozone Generators. Use for serious restoration work, commercial applications, manufacturing, barns, etc. Read why UV ozone generators outperform units rated higher. The UV PRO 6800 is designed for use as the ultimate heavy duty shock treatment tool. In moderate to higher humidity, the UV PRO 6800 exceeds the ozone output of competing units rated at 29,000mghr. (Read the product description to understand why).
Ideal for use in fire / flood restoration, crime scene cleanup (protein decomposition), garbage compactors, garbage transfer stations, heavy restoration, auto detailing, all heavy odor remediation tasks, food service sterilization packaging / manufacturing, bacteria or mold odors Home/ Commercial decontamination, purifying rooms in hotels and for killing mold, and more. |
Call us to inquire about your application Questions: OZONE GENERATOR SELECTION |