-
V 8000 OZONE GENERATOR SPECIFICATIONS
The V 8000 ozone generator is designed for use with oxygen or an air drier. It is available with options such as, 120 or 240 volt operation, 10 position switch, and requires no cleaning. |
---|
Ozone Generation Silent pulse injection corona discharge. Process Gas Dry air or oxygen, free of dust and oil. Max. pressure ±0.36 bar (±5 psi). Ozone Production 4g/h from dry air at 5 L/min air flow, approximately 8g/h from oxygen. (1 L/min = 2 SCFH)
| | This chart represents use with dry air. When using oxygen, double the output figures. The V 8000 will produce 25 grams of ozone per cubic meter at an oxygen flow rate of 5 LPM, and 40 grams of ozone per cubic meter at 2 LPM. This is a significant concentration.
| Cooling Ambient air ± 40°C max. 85% R.H.Power 100-120V/60Hz or 220-240V/50Hz, 120W. Dimensions 432mm high x 245mm wide x 133mm deep (17" x 10" x 5") powder coated, aluminum cabinet with key holes for wall mounting. Warnock & Hersey Certified CSA file L18014 - Canada ETL file #98260 - U.S.A. Safety A minimum air flow is not required. The unit is protected against voltage surges and continuous 150% over voltage. The Balance Barometer is required with all water treatment installations. Warranty 3 years Installation Refer to installation manual for specific conditions. Operation In conjunction with air dryers, controllers, mixing systems, and other equipment approved by the Application Engineering Department. $1,219.97 | 110-120 Volt 60Hz | | $1,409.97 | 220-240V/50Hz |
$1,294.97 | (100-120V/60Hz Version with 10 Position Switch) | | $1,425.97 | (220-240V/50Hz Version with 10 Position Switch) |
|
Additional Pictures:
(pictures shown without ozone control)
Units are available with outputs of 280mghr, Ductzone 300, 420, 700, 1,000, 1,908, 2,600, 3,600, 5,000, 8,000 and 10,000 mg/hr. Some of these units can be upgraded for higher outputs. Commercial: PRO 3400 V3, PRO 3400 V5, PRO 3600 V1, PRO 3600 V5, PRO 5000 V, PRO 10000 V, or 0302-8000 Residential: MZ280, PRO 420, PRO 700, PRO 3400 V1, PRO 3400 V3, PRO 3400 V5, CA 45-2, PRO 3600 V1, or PRO 3600 V5 Ultra-Pure Laboratory Equipment, Materials Research or Water / Liquid Disinfection: V 8000, S 4000, (many more choices available on the Ultra Pure Products page). |